Home » Products » Mineral Insulated Cable » Mineral insulated thermocouple cable » Simplex Mineral Insulated Thermocouple Cable (MI Cable) with Stainless steel SS316

Simplex Mineral Insulated Thermocouple Cable (MI Cable) with Stainless steel SS316

Share to:

. Simplex mineral insulated thermocouple cable
. Differnet sheath diameters from 0.25mm to 12.7mm
. Sheath material: SS316
. Standard no. of conductors: 2 conductors
. Internal conductors: Thermocouple J, K, T, E, N
. MI cables with high reliability and high heat resistance
. MI cables withstands vibration and pressures

Quantity:

Technical Data


Feature
. Mineral insulated cables are the industry standard, proven choice for high temperature probe fabrication.
. Bulk MI cable is rugged, inexpensive, reliable, widely accepted by industry, and readily available in standard configurations, the metal sheath provides a self-armoured cable, which is mechanically robust even at small diameters.
. The small mass and high thermal conductivity of a properly made cable promotes rapid response of the finished thermocouple assembly.
. Sheath materials can be selected to offer strong resistance against corrosive environments and extremely high temperature effects.

Sheath Material of SS316
Applications
: Chemical instrument construction, nuclear power plants, reactor instrumentation, furnace construction, sulphite, chemical pulp, textile, dye, fatty acid, photochemical and pharmaceutical industries.
Max. continuous temperature: 925°C
Heat resistance: Good oxidation resistance in intermittent service to 800°C and in continuous service to 925°C. 
Corrosion resistance: Good resistance to a wide range of chemicals. Highly resistant to complex sulphur compounds used in pulp and paper processing. Also resists attack of marine and corrosive industrial atmospheres.
Welding: Good characteristics suited to all standard welding methods.

Chemical Composition of Stainless Steel Sheath                 

       

Sheath Material

     

Chemical Composition

Max. Temp. In Air Melting Temp.
C Si Mn P S Cr Ni

Others

SS316 ≤0.08 ≤1.00

≤2.00

≤0.035 ≤0.03 16-19

11-14

Mo: 1.8-2.5

925℃

1370℃


Sheath Specification                                                
 Outside sheath diameter   ±0.05mm or ±1% of nominal diameter
 Wall thickness  10% of sheath diameter as a minimum
 Wire diameter  15% of sheath diameter as a minimum for 2 wires,
 12% of sheath diameter as a minimum for 4 wires,
 9% of sheath diameter as a minimum for 6 wires. 
 Calibration  To meet special limits of error as defined in ASTM-E230 and IEC 60584-2
 MgO purity  99.6% MgO powder

 Sheath material    

 Sheath OD (mm)      Wall Thickness (mm)   

 Wire Dia. (mm)     

 Coil Length(m)    
         SS316  0.5  0.05-0.10  0.08-0.12     

 200     

 1.0 

 0.10-0.20      0.15-0.20      200    
 1.5   

 0.15-0.25   

 0.23-0.30     

 200   

 1.6      0.16-0.26     0.26-0.36     200    
 2.0    

 0.20-0.35    

 0.30-0.50     

 100     

 2.4    

 0.24-0.36     

 0.36-0.41     

 100    

 3.0

 0.30-0.48

 0.45-0.60

 100     

 3.2

 0.32-0.58     

 0.48-0.68     

 100     

 4.0    

 0.40-0.62     

 0.60-0.70       70     

 4.5     

 0.45-0.68     

 0.68-0.77     

 70     

 4.8     

 0.48-0.83     

 0.72-0.85     

 70     

 6.0     

 0.60-1.08     

 0.90-1.10     

 50     

 6.4     

 0.64-1.15     

 0.92-1.12     

 40     

 8.0     

 0.80-1.44     

 1.20-1.40     

 30     

 9.5     

 0.95-1.43     

 1.43-1.62     

 20     

 10.0     

1.00-1.50     

 1.50-1.70     

 20     

 10.8     

 1.08-1.62       1.62-1.84     

 20     

 12.7     

 1.27-1.90     

 1.91-2.05     

 10     


Calibration Tolerance

  Calibration

 Tolerance     

 Special Limits (Grade I)

 Standard Limits (Grade II)      Temperature Range (℃)     

 K (Chromel vs Alumel)     

 ±1.5°C or ±0.4%   ±2.5°C or ±0.75%  -40~1000     

 J (Iron vs Constantan)     

 -40~750     

 E (Chromel vs Constantan)

 -40~800

 T (Copper vs Constantan)

 ±1°C or ±0.75%  -40~350


Order Code


Order Code of Mineral Insulated Thermocouple Cable (MI Cable):  

 Calibration    

Sheath OD (mm)    

Sheath Material    

 Type K     

 Type J     

 Type E     

 Type T     

 MIC-K-0.5-SS316  MIC-J-0.5-SS316

 MIC-E-0.5-SS316

 MIC-T-0.5-SS316

 0.5

 SS316

 MIC-K-1.0-SS316  MIC-J-1.0-SS316  MIC-E-1.0-SS316  MIC-T-1.0-SS316  1.0   SS316

 MIC-K-1.5-SS316

 MIC-J-1.5-SS316

 MIC-E-1.5-SS316

 MIC-T-1.5-SS316

 1.5

 SS316

 MIC-K-1.6-SS316

 MIC-J-1.6-SS316 

 MIC-E-1.6-SS316

 MIC-T-1.6-SS316

 1.6

 SS316
 MIC-K-2.0-SS316  MIC-J-2.0-SS316

 MIC-E-2.0-SS316

 MIC-T-2.0-SS316

 2.0 

 SS316 

 MIC-K-2.4-SS316  MIC-J-2.4-SS316  MIC-E-2.4-SS316  MIC-T-2.4-SS316  2.4  SS316
 MIC-K-3.0-SS316  MIC-J-3.0-SS316  MIC-E-3.0-SS316  MIC-T-3.0-SS316  3.0  SS316
 MIC-K-3.2-SS316  MIC-J-3.2-SS316  MIC-E-3.2-SS316  MIC-T-3.2-SS316  3.2  SS316
 MIC-K-4.0-SS316  MIC-J-4.0-SS316  MIC-E-4.0-SS316  MIC-T-4.0-SS316  4.0  SS316
 MIC-K-4.5-SS316  MIC-J-4.5-SS316  MIC-E-4.5-SS316  MIC-T-4.5-SS316  4.5  SS316
 MIC-K-4.8-SS316  MIC-J-4.8-SS316  MIC-E-4.8-SS316  MIC-T-4.8-SS316  4.8  SS316
 MIC-K-5.0-SS316  MIC-J-5.0-SS316  MIC-E-5.0-SS316  MIC-T-5.0-SS316  5.0  SS316
 MIC-K-6.0-SS316  MIC-J-6.0-SS316  MIC-E-6.0-SS316  MIC-T-6.0-SS316  6.0  SS316
 MIC-K-6.4-SS316  MIC-J-6.4-SS316  MIC-E-6.4-SS316  MIC-T-6.4-SS316  6.4  SS316
 MIC-K-8.0-SS316  MIC-J-8.0-SS316  MIC-E-8.0-SS316  MIC-T-8.0-SS316  8.0  SS316
 MIC-K-9.5-SS316  MIC-J-9.5-SS316  MIC-E-9.5-SS316  MIC-T-9.5-SS316  9.5  SS316
 MIC-K-10.0-SS316  MIC-J-10.0-SS316  MIC-E-10.0-SS316  MIC-T-10.0-SS316  10.0  SS316
 MIC-K-10.8-SS316  MIC-J-10.8-SS316  MIC-E-10.8-SS316  MIC-T-10.8-SS316  10.8  SS316
 MIC-K-12.7-SS316  MIC-J-12.7-SS316  MIC-E-12.7-SS316  MIC-T-12.7-SS316  12.7  SS316

Order Example:
 1. MIC-K-0.5-SS316, it means you order MI thermocouple cable is Simplex, type K, sheath dia: 0.5mm, sheath material: SS316.
 2. If you order MI thermocouple cable is Duplex, please change "MIC" to "MICD", it means "MICD-K-0.5-SS316".
 3. If you order MI thermocouple cable is Triple, please change "MIC" to "MICT", it means "MICT-K-0.5-SS316".
 4. If you order MI thermcouple cable is special limits, please change calibration "K" to "KK", it means "MIC-KK-0.5-SS316".
 5. For other calibration such as type N is also available.
 

Feedback
Add: Guang'an Road, Zhiguang Industrial Zone, Liushi, Wenzhou, Zhejiang, China      Tel: 86-577-61731117       Fax: 86-577-61731116       Post Code:325604     E-mail: zonzen@zonzen.com 
​Copyright © 2015,Zhejiang Zonzen Electric Co.,Ltd All Resolved    Site Map    Old WebSite