50W Isolated Dual Output Switching Power Supply (SKID-50)


50W Isolated Dual Output Switching Power Supply (SKID-50)

Features:

●   High efficiency, high reliability, low cost
●   Universal AC input / full range
●   100% full load burn-in test
●   Protections: Short circuit/ Over load / Over voltage
●   Cooling by free air convection
●   Fixed switching frequency at 50KHz
●   Dimensions: 159*97*38mm (L*W*H)
●   Isolated ouput & GND for CH1, CH2
●   1 year warranty

50W Isolated Dual Output Switching Power Supply (SKID-50)

Specification:

Model		SKID-50A		SKID-50B		SKID-50C		SKID-50D
		CH1	CH2	CH1	CH2	CH1	CH2	CH1	CH2
Output	DC Voltage	5V	5V	13.5V	13.5V	27V	27V	5V	13.5V
	Voltage Tolerance	±1%	±2%	±1%	±2%	±1%	±2%	±1%	±2%
	Rated Current	6A	2A	1.8A	1.8A	0.9A	0.9A	5A	1.7A
	Current Range	0.5-6A	0-2A	0.3-2A	0-2A	0.18-1A	0-1A	1-5A	0-2A
	Rated Power	40W		48.6W		48.6W		48W
	Ripple & Noise	50 mVp-p	100 mVp-p	100 mVp-p	150 mVp-p	100 mVp-p	150 mVp-p	50 mVp-p	150mVp-p
	DC Voltage Adj. Range	-5% +10%		±11%		±11%		-5% +10%
	Setup,Rise,Hold Time	1600ms,50ms,100ms at full load
Input	Voltage Range	85～264VAC 47～63 Hz; selected by switch, 120～370VDC
	AC Current	1A/115VAC 0.6A/ 230VAC
	Efficiency	66%		70%		72%		68%
	Inrush Current	Cold start 18A/115V 36A/230V
	Leakage Current	< 3.5 mA/240VAC
Protection	Over Load	105%～150%
		Protection type: hiccup mode, recovers automatically after fault condition is removed.
	Over Voltage	125%～150%
		Protection type: hiccup mode, recovers automatically after fault condition is removed
Environment	Working Temp & Humidity	-10℃～+60℃; 20%～90 %RH
	Storage Temp & Humidity	-20℃～+85℃; 10%～95 %RH
	Vibration	10～500Hz, 2G 10min./1cycle, period for 60min, each along X, Y, Z axes
Safety	Withstand Voltage	I/P-O/P: 1.5KVAC I/P-FG: 1.5KVACO/P-FG: 0.5KVAC
	Isolation Resistance	I/P-O/P, I/P-FG, O/P-FG: 100MΩ/500VDC
Standards	Safety Standard	Design refer to UL1012
	EMC Standard	Design refer to FCC Part15
Others	Weight	0.54Kg
	Packing	30pcs/16Kg/0.86CUFT