You are here: Home » Products » Mineral Insulated Cable » Mineral insulated thermocouple cable » Mineral Insulated Thermocouple Cable (Diameter: 6.4mm)
This product has been off the shelf!

loading

Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button

Mineral Insulated Thermocouple Cable (Diameter: 6.4mm)

MI Cable (MIC)
Calibration: Type K, J, E, T
Sheath OD: 6.4mm
Sheath material: SS304, SS321, SS316, SS310, INC600
Simplex, Duplex, triple or others

Feature

Mineral Insulated Thermocouple Cable (Diameter: 6.4mm)

1). Mineral insulated cables are the industry standard, proven choice for high temperature probe fabrication.
2). Bulk MI cable is rugged, inexpensive, reliable, widely accepted by industry, and readily available in standard configurations, the metal sheath provides a self-armoured cable, which is mechanically robust even at small diameters.
3). The small mass and high thermal conductivity of a properly made cable promotes rapid response of the finished thermocouple assembly.
4). Sheath materials can be selected to offer strong resistance against corrosive environments and extremely high temperature effects.

Technical Data

Mineral Insulated Material 

SS304
Maximum temperature: 900°C (1650°F). Most widely used low temperature sheath material. Extensively used in food, beverage, chemical and other industries where corrosion resistance is required. Subject to damaging carbide precipitation in 482°C to 871°C (900° to 1600°F) range. Lowest cost corrosion resistant sheath material available.


SS321
Maximum temperature: 871°C (1600°F). Similar to 304 SS except titanium stabilized for intergranular corrosion. This alloy is designed to overcome susceptibility to carbide precipitation in the 482° to 871°C (900° to 1600°F) range. Used in aerospace and chemical applications.


SS316
Maximum temperature: 900°C (1650°F). Best corrosion resistance of the austenitic stainless steel grades. Good corrosion resistance in H2S. Widely used in the food and chemical industry. Subject to damaging carbide precipitation in 482° to 871°C (900° to 1600°F) range.


SS310
Maximum temperature: 1150°C (2100°F). Mechanical and corrosion resistance, similar to but better than 304 SS. Very good heat resistance. This alloy contains 25% Cr, 20% Ni. Not as ductile as 304 SS.


Inconel 600
Maximum temperature: 1177°C (2150°F) Continuous; 1260°C (2300°F) Intermittent. Similar to Alloy 600 with the addition of aluminum for outstanding oxidation resistance. Designed for high temperature corrosion resistance. This material is good in carburizing environments, and has good creep rupture strength. Do not use in vacuum furnaces! Susceptible to intergranular attack by prolonged heating in 538° to 760°C (1000° to 1400°F) temperature range.


Chemical Composition of Stainless Steel Sheath                 

       

Sheath Material

     

Chemical Composition

Max. Temp. In Air Melting Temp.
C Si Mn P S Cr Ni

Others

SS304 ≤0.07 ≤1.00

≤2.00

≤0.035 ≤0.03 17-19

8-11

-

900℃

1405℃

SS321

≤0.12

≤1.00

≤2.00

≤0.035 ≤0.03

17-19

8-11

5(C%-0.02)~0.08

870℃

1400℃
SS316

≤0.08

≤1.00

≤2.00

≤0.035

≤0.03

16-19

11-14

Mo: 1.8-2.5

925℃

1370℃

SS310

≤0.08

≤1.00

≤2.00

≤0.035

≤0.03

24-26

19-22

Ti: 5C%-0.07

1090℃

1405℃
INC600

≤0.15

≤0.50

≤1.00

≤0.030

≤0.015

14-17

>72

Fe: 6-10, Cu: <0

1090℃

1400℃


Sheath Specification                                                                                               

 Sheath material    

 Sheath OD (mm)       Wall Thickness (mm)   

 Wire Dia. (mm)     

 Coil Length(m)    
         SS304       

         SS321       

         SS316       

         SS310       

         INC600  

 0.5  0.05-0.10  0.08-0.12     

 200     

 1.0 

 0.10-0.20      0.15-0.20      200    
 1.5   

 0.15-0.25   

 0.23-0.30     

 200   

 1.6      0.16-0.26     0.26-0.36     200    
 2.0    

 0.20-0.35    

 0.30-0.50     

 100     

 2.4    

 0.24-0.36     

 0.36-0.41     

 100    

 3.0

 0.30-0.48

 0.45-0.60

 100     

 3.2

 0.32-0.58     

 0.48-0.68     

 100     

 4.0    

 0.40-0.62     

 0.60-0.70       70     

 4.5     

 0.45-0.68     

 0.68-0.77     

 70     

 4.8     

 0.48-0.83     

 0.72-0.85     

 70     

 6.0     

 0.60-1.08     

 0.90-1.10     

 50     

 6.4     

 0.64-1.15     

 0.92-1.12     

 40     

 8.0     

 0.80-1.44     

 1.20-1.40     

 30     

 9.5     

 0.95-1.43     

 1.43-1.62     

 20     

 10.0     

1.00-1.50     

 1.50-1.70     

 20     

 10.8     

 1.08-1.62       1.62-1.84     

 20     

 12.7     

 1.27-1.90     

 1.91-2.05     

 10     

 
Calibration Tolerance

  Calibration

 Tolerance     

 Special Limits (Grade I)

 Standard Limits (Grade II)      Temperature Range (℃)     

 K (Chromel vs Alumel)     

 1.5°C or 0.4%t      2.5°C or 0.75%t      -40~1000     

 J (Iron vs Constantan)     

 -40~750     

 E (Chromel vs Constantan)     

 -40~800     

 T (Copper vs Constantan)     

 1°C or 0.75%t       -40~350     


Order Code

Order Code:  

 Calibration    

Sheath OD (mm)    

Sheath Material    

 Type K     

 Type J     

 Type E     

 Type T     

 MIC-K-6.4-SS304       MIC-J-6.4-SS304     

 MIC-E-6.4-SS304     

 MIC-T-6.4-SS304     

 6.4

 SS304     

 MIC-K-6.4-SS321       MIC-J-6.4-SS321       MIC-E-6.4-SS321       MIC-T-6.4-SS321  6.4  SS321     

 MIC-K-6.4-SS316    

 MIC-J-6.4-SS316

 MIC-E-6.4-SS316

 MIC-T-6.4-SS316     

 6.4

 SS316     

 MIC-K-6.4-SS310    

 MIC-J-6.4-SS310

 MIC-E-6.4-SS310

 MIC-T-6.4-SS310     

 6.4

 SS310     
 MIC-K-6.4-INC600       MIC-J-6.4-INC600     

 MIC-E-6.4-INC600     

 MIC-T-6.4-INC600     

 6.4

 INC600

Order Example:
 1. MIC-K-6.4-SS316, it means you order MI thermocouple cable is Simplex, type K, sheath dia: 6.4mm, sheath material: SS316
 2. If you order MI thermocouple cable is Duplex, please change "MIC" to "MICD", it means "MICD-K-6.4-SS316"
 3. If you order MI thermocouple cable is Triple, please change "MIC" to "MICT", it means "MICT-K-6.4-SS316"

Previous: 
Next: 
Feedback

Navigations

Product Categories

Contact Us

   +86-577-61731117
   +86-577-61731116
   +86-13868772123
   +86-13868772123

Get In Touch

Check our privacy policy on how we collect and process your information.
Copyright 2022 © Zhejiang Zonzen Electric Co., Ltd. All Rights Reserved. Sitemap. Privacy Policy