Mineral Insulated Thermocouple Cable (Diameter: 1.5mm)

Mineral Insulated Thermocouple Cable (Diameter: 1.5mm)

1). Mineral insulated cables are the industry standard, proven choice for high temperature probe fabrication.
2). Bulk MI cable is rugged, inexpensive, reliable, widely accepted by industry, and readily available in standard configurations, the metal sheath provides a self-armoured cable, which is mechanically robust even at small diameters.
3). The small mass and high thermal conductivity of a properly made cable promotes rapid response of the finished thermocouple assembly.
4). Sheath materials can be selected to offer strong resistance against corrosive environments and extremely high temperature effects.

Mineral Insulated Material 

SS304
Maximum temperature: 900°C (1650°F). Most widely used low temperature sheath material. Extensively used in food, beverage, chemical and other industries where corrosion resistance is required. Subject to damaging carbide precipitation in 482°C to 871°C (900° to 1600°F) range. Lowest cost corrosion resistant sheath material available.

SS321
Maximum temperature: 871°C (1600°F). Similar to 304 SS except titanium stabilized for intergranular corrosion. This alloy is designed to overcome susceptibility to carbide precipitation in the 482° to 871°C (900° to 1600°F) range. Used in aerospace and chemical applications.

SS316
Maximum temperature: 900°C (1650°F). Best corrosion resistance of the austenitic stainless steel grades. Good corrosion resistance in H2S. Widely used in the food and chemical industry. Subject to damaging carbide precipitation in 482° to 871°C (900° to 1600°F) range.

SS310
Maximum temperature: 1150°C (2100°F). Mechanical and corrosion resistance, similar to but better than 304 SS. Very good heat resistance. This alloy contains 25% Cr, 20% Ni. Not as ductile as 304 SS.

Inconel 600
Maximum temperature: 1177°C (2150°F) Continuous; 1260°C (2300°F) Intermittent. Similar to Alloy 600 with the addition of aluminum for outstanding oxidation resistance. Designed for high temperature corrosion resistance. This material is good in carburizing environments, and has good creep rupture strength. Do not use in vacuum furnaces! Susceptible to intergranular attack by prolonged heating in 538° to 760°C (1000° to 1400°F) temperature range.

Chemical Composition of Stainless Steel Sheath                 

Sheath Material	Chemical Composition								Max. Temp. In Air	Melting Temp.
	C	Si	Mn	P	S	Cr	Ni	Others
SS304	≤0.07	≤1.00	≤2.00	≤0.035	≤0.03	17-19	8-11	-	900℃	1405℃
SS321	≤0.12	≤1.00	≤2.00	≤0.035	≤0.03	17-19	8-11	5(C%-0.02)~0.08	870℃	1400℃
SS316	≤0.08	≤1.00	≤2.00	≤0.035	≤0.03	16-19	11-14	Mo: 1.8-2.5	925℃	1370℃
SS310	≤0.08	≤1.00	≤2.00	≤0.035	≤0.03	24-26	19-22	Ti: 5C%-0.07	1090℃	1405℃
INC600	≤0.15	≤0.50	≤1.00	≤0.030	≤0.015	14-17	>72	Fe: 6-10, Cu: <0	1090℃	1400℃

Sheath Specification                                                                                               

Sheath material	Sheath OD (mm)	Wall Thickness (mm)	Wire Dia. (mm)	Coil Length(m)
SS304                 SS321                 SS316                 SS310                 INC600	0.5	0.05-0.10	0.08-0.12	200
	1.0	0.10-0.20	0.15-0.20	200
	1.5	0.15-0.25	0.23-0.30	200
	1.6	0.16-0.26	0.26-0.36	200
	2.0	0.20-0.35	0.30-0.50	100
	2.4	0.24-0.36	0.36-0.41	100
	3.0	0.30-0.48	0.45-0.60	100
	3.2	0.32-0.58	0.48-0.68	100
	4.0	0.40-0.62	0.60-0.70	70
	4.5	0.45-0.68	0.68-0.77	70
	4.8	0.48-0.83	0.72-0.85	70
	6.0	0.60-1.08	0.90-1.10	50
	6.4	0.64-1.15	0.92-1.12	40
	8.0	0.80-1.44	1.20-1.40	30
	9.5	0.95-1.43	1.43-1.62	20
	10.0	1.00-1.50	1.50-1.70	20
	10.8	1.08-1.62	1.62-1.84	20
	12.7	1.27-1.90	1.91-2.05	10

 
Calibration Tolerance

Calibration	Tolerance
	Special Limits (Grade I)	Standard Limits (Grade II)	Temperature Range (℃)
K (Chromel vs Alumel)	1.5°C or 0.4%t	2.5°C or 0.75%t	-40~1000
J (Iron vs Constantan)			-40~750
E (Chromel vs Constantan)			-40~800
T (Copper vs Constantan)		1°C or 0.75%t	-40~350

Order Code:  

Calibration				Sheath OD (mm)	Sheath Material
Type K	Type J	Type E	Type T
MIC-K-1.5-SS304	MIC-J-1.5-SS304	MIC-E-1.5-SS304	MIC-T-1.5-SS304	1.5	SS304
MIC-K-1.5-SS321	MIC-J-1.5-SS321	MIC-E-1.5-SS321	MIC-T-1.5-SS321	1.5	SS321
MIC-K-1.5-SS316	MIC-J-1.5-SS316	MIC-E-1.5-SS316	MIC-T-1.5-SS316	1.5	SS316
MIC-K-1.5-SS310	MIC-J-1.5-SS310	MIC-E-1.5-SS310	MIC-T-1.5-SS310	1.5	SS310
MIC-K-1.5-INC600	MIC-J-1.5-INC600	MIC-E-1.5-INC600	MIC-T-1.5-INC600	1.5	INC600

Order Example:
 1. MIC-K-1.5-SS316, it means you order MI thermocouple cable is Simplex, type K, sheath dia: 1.5mm, sheath material: SS316
 2. If you order MI thermocouple cable is Duplex, please change "MIC" to "MICD", it means "MICD-K-1.5-SS316"
 3. If you order MI thermocouple cable is Triple, please change "MIC" to "MICT", it means "MICT-K-1.5-SS316"