FEP insulated parallel construction thermocouple wire-Single pair

. Calibration: Type K, J, E, T, N, R/S
. Wire type: Solid or stranded
. Number of pairs: Single
. Insulation: FEP
. Conductor configuration: Parallel
. Tolerance: Standard limits of error or special limits of error
. Max. operating temperature: 200°C
. Color code: ANSI, IEC, JIS, DIN

Quantity:



Inquiry Add to Basket

Feature

FEP insulated parallel construction thermocouple wire and thermocouple extension wire--Single pair, flat

. Continuous use up to 200°C

. Short term use up to 250°C

. Excellent heat, chemical, abrasion and moisture resistance
. Calibration test report is available

* ZONZEN does not use reprocessed FEP in manufacturing thermocouple wire.

FEP-FEP Physical Properties

Characteristics	Insulation	Jacket
Abrasion Resistance	Excellent	Excellent
Cut Through Resistance	Good	Good
Moisture Resistance	Excellent	Excellent
Solvent Resistance	Good	Good
Service Temperature	200°C continuous 250°C single	200°C continuous 250°C single
Flame Test	Non-flammable	Non-flammable

Specification

Item	Specification
Calibration	Type J	Type K	Type T	Type E	Type N
	+ Iron - Constantan	+ Chromel - Alumel	+ Copper - Constantan	+ Chromel - Constantan	+ Nirosil - Nisil
Wire size	12, 14, 16, 18, 20, 24, 26, 28, 30, 32AWG
Wire type	Solid or Stranded
Construction	Parallel conductors
Number of pair	Single
Insulation	FEP
Jacket	FEP
Tolerance	Standard limits of error or special limits of error
Max. Operating temperature	200°C
Color code	ANSI, IEC, JIS, DIN
Packing	Roll or spool (As required)

Order Code

Model explanation

model-k-fep-fep

1 Calibration: K, J, T, E, N
2 Insulation: FEP
3 Jacket: FEP
4 Wire size: 12, 14, 16, 18, 20, 24, 26, 28, 30, 32AWG
5 "S" means "Stranded"; "Blank" means "Solid"

Order code:

Type	Wire Size(AWG)	Diameter (mm)	Conductor	Calibration
Type	Wire Size(AWG)	Diameter (mm)	Conductor	Type J	Type K	Type T	Type E
Thermocouple wire	12	1/1.78	Solid	J-FEP-FEP-12	K-FEP-FEP-12	T-FEP-FEP-12	E-FEP-FEP-12
	12 7/20	7/0.67	Stranded	J-FEP-FEP-12S	K-FEP-FEP-12S	T-FEP-FEP-12S	E-FEP-FEP-12S
	14	1/1.63	Solid	J-FEP-FEP-14	K-FEP-FEP-14	T-FEP-FEP-14	E-FEP-FEP-14
	14 7/22	7/0.635	Stranded	J-FEP-FEP-14S	K-FEP-FEP-14S	T-FEP-FEP-14S	E-FEP-FEP-14S
	16	1/1.29	Solid	J-FEP-FEP-16	K-FEP-FEP-16	T-FEP-FEP-16	E-FEP-FEP-16
	16 7/24	7/0.50	Stranded	J-FEP-FEP-16S	K-FEP-FEP-16S	T-FEP-FEP-16S	E-FEP-FEP-16S
	20	1/0.80	Solid	J-FEP-FEP-20	K-FEP-FEP-20	T-FEP-FEP-20	E-FEP-FEP-20
	20 7/28	7/0.30	Stranded	J-FEP-FEP-20S	K-FEP-FEP-20S	T-FEP-FEP-20S	E-FEP-FEP-20S
	24	1/0.50	Solid	J-FEP-FEP-24	K-FEP-FEP-24	T-FEP-FEP-24	E-FEP-FEP-24
	24 7/32	7/0.20	Stranded	J-FEP-FEP-24S	K-FEP-FEP-24S	T-FEP-FEP-24S	E-FEP-FEP-24S
	26	1/0.40	Solid	J-FEP-FEP-26	K-FEP-FEP-26	T-FEP-FEP-26	E-FEP-FEP-26
	26 7/34	7/0.16	Stranded	J-FEP-FEP-26S	K-FEP-FEP-26S	T-FEP-FEP-26S	E-FEP-FEP-26S
	28	1/0.32	Solid	J-FEP-FEP-28	K-FEP-FEP-28	T-FEP-FEP-28	E-FEP-FEP-28
	28 7/36	7/0.13	Stranded	J-FEP-FEP-28S	K-FEP-FEP-28S	T-FEP-FEP-28S	E-FEP-FEP-28S
	30	1/0.25	Solid	J-FEP-FEP-30	K-FEP-FEP-30	T-FEP-FEP-30	E-FEP-FEP-30
	32	1/0.20	Solid	J-FEP-FEP-32	K-FEP-FEP-32	T-FEP-FEP-32	E-FEP-FEP-32

Note: The products referenced above represent the most popular constructions. Other constructions can be manufactured to meet individual specification and application requirements.

Inner shield
All above thermocouple wire can be finished with a inner shield(Stainless steel-SSB, Tinned copper-TCB). If you need the wire with a inner shield, please add "SSB or TCB" to the order code, such as "J-FEP-SSB-FEP-20S", it means Type J, 20AWG, Stranded, Insulation: FEP, Inner shield: Stainless steel, Jacket: FEP.

Outer shield
All above thermocouple wire also can be finished with a metal outer shield to give added protection from abrasion and mechanical damage. If you need the wire with a outer shield, please add "SSB or TCB" to the order code, such as "J-FEP-FEP-SSB-20S", it means Type J, 20AWG, Stranded, Insulation: FEP, Jacket: FEP, Outer shield: Stainless steel

Technical Data

Color Code & Initial Calibration Tolerance for Thermocouple Wire:

Thermocouple ype		ANSI Color Code		Initial Calibration Tolerances
Wire Alloys	Calibration	Conductor (+/-)	Jacket	Temperature Range	Standard Limits	Special Limits
Iron(+) vs. Constantan(-)	J	White/Red	Brown	0°C to +285°C 285°C to +750°C	± 2.2°C ± 0.75%	± 1.1°C ± 0.4%
CHROMEL(+) vs. ALUMEL(-)	K	Yellow/Red	Brown	-200°C to -110°C -110°C to 0°C 0°C to +285°C 285°C to +1250°C	± 2% ± 2.2°C ± 2.2°C ± 0.75%	± 1.1°C ± 0.4%
Copper(+) vs. Constantan(-)	T	Blue/Red	Brown	-200°C to -65°C -65°C to +130°C 130°C to +350°C	± 1.5% ± 1°C ± 0.75%	± 0.8% ± 0.5°C ± 0.4%
CHROMEL(+) vs. Constantan(-)	E	Purple/Red	Brown	-200°C to -170°C -170°C to +250°C 250°C to +340°C 340°C+900°C	± 1% ± 1.7°C ± 1.7°C ± 0.5%	± 1°C ± 1°C ± 0.4% ± 0.4%

Nominal Insulation Thickness:

Wire Size (AWG)	Conductor Insulation Thickness (mm)	Jacket Insulation Thickness (mm)	Outer Diameter (mm)
16	0.22	0.40	2.7X4.5
16 7/24	0.22	0.40	2.7X4.5
20	0.20	0.35	1.9X3.2
20 7/28	0.20	0.35	1.9X3.2
24	0.20	0.30	1.4X2.4
24 7/32	0.20	0.30	1.4X2.4
26	0.20	0.20	1.2X2.2
28	0.15	0.20	1.1X2.1
30	0.10	0.17	0.6X1.0